ServoCity Stingray-7 Servo Gearbox (1.19 Sec/60°, 2450 Oz-in Torque, 257° Rotation)

Title Default Title
Qty:

Description

  • ServoCity Stingray-7 Servo Gearbox (1.19 Sec/60°, 2450 Oz-in Torque, 257° Rotation)
  • Enhances torque with 7:1 gear ratio
  • Supports versatile, easy installation
  • Compatible with R/C receivers, Arduino
  • Features dual-mode capability
  • Legal for FTC use

The ServoCity Stingray-7 Servo Gearbox (1.19 Sec/60°, 2450 Oz-in Torque, 257° Rotation) is engineered to enhance torque and precision through a 7:1 external gear ratio, driven by the goBILDA 5-Turn Torque Servo. This gearbox is fully assembled and designed for easy installation, featuring a steel hub shaft supported by ball bearings to protect the servo from axial loads.

It offers versatile mounting options with M4 threaded holes compatible with the goBILDA system, and the hub shaft's 8mm REX bore can accommodate an 8mm REX shaft or serve as a wire pass-through. The gearbox functions similarly to a standard servo but with increased range and torque, maintaining compatibility with R/C receivers, Arduino, Raspberry Pi, or REV controllers. It is FTC-legal as the servo remains unmodified. Available in feedback and continuous modes, the gearbox allows for mode toggling using a 3102-0001 servo programmer, thanks to the dual-mode capability of the goBILDA 5-Turn Torque Servo.

  • 1x ServoCity Stingray-7 Servo Gearbox (1.19 Sec/60°, 2450 Oz-in Torque, 257° Rotation)

  • Gear ratio: 7:1
  • Voltage range: 4.8V - 8.4V
  • No-load speed at 4.8V: 1.75 sec/60° (5.7 RPM)
  • No-load speed at 6.0V: 1.40 sec/60° (7.1 RPM)
  • No-load speed at 7.4V: 1.20 sec/60° (8.6 RPM)
  • Stall torque at 4.8V: 1680 oz-in (120.4 kg.cm)
  • Stall torque at 6.0V: 2100 oz-in (151.2 kg.cm)
  • Stall torque at 7.4V: 2450 oz-in (176.4 kg.cm)
  • No-load current at 4.8V: 150mA
  • No-load current at 6V: 160mA
  • No-load current at 7.4V: 200mA
  • Stall current at 4.8V: 2000mA
  • Stall current at 6V: 2500mA
  • Stall current at 7.4V: 3000mA
  • Motor type: Brushed DC
  • Direction with increasing PWM signal: Counterclockwise
  • Maximum PWM range: 500-2500μsec
  • Maximum PWM range (continuous): 900-2100µsec
  • Travel per μsec: 0.13°/µsec
  • Maximum rotation: 257° (0.75 turns)
  • Pulse amplitude: 3-5V
  • Deadband width: 4μsec
  • Wire gauge: 22AWG
  • Connector type: 3-Pos TJC8 Servo Connector [MH-FC]