ServoCity Stingray-4 Servo Gearbox (0.68 Sec/60°, 15 rpm, 1400 Oz-in Torque, 450° Rotation)

Title Default Title
Qty:

Description

  • ServoCity Stingray-4 Servo Gearbox (0.68 Sec/60°, 15 rpm, 1400 Oz-in Torque, 450° Rotation)
  • Enhances torque with 4:1 gear ratio
  • Isolates load with steel hub-shaft
  • Offers versatile mounting options
  • Maintains compatibility with R/C systems
  • Supports mode toggling with servo programmer

The ServoCity Stingray-4 Servo Gearbox (0.68 Sec/60°, 15 rpm, 1400 Oz-in Torque, 450° Rotation) is engineered to enhance torque and precision through a 4:1 external gear ratio, driven by the goBILDA® 5-Turn Torque Servo. This gearbox is designed to isolate the load to a steel hub-shaft supported by ball bearings, thereby safeguarding the servo from axial loads. It offers versatile mounting options with M4 threaded holes compatible with the goBILDA® system, and the hub-shaft's 8mm REX bore can accommodate an 8mm REX shaft or serve as a wire pass-through.

The gearbox functions similarly to a standard servo but with increased range and torque, maintaining compatibility with R/C receivers, Arduino, Raspberry Pi, or REV controllers. It is FTC legal as the servo remains unmodified. Available in feedback and continuous modes, the gearbox allows for mode toggling via a servo programmer, thanks to the dual-mode capability of the goBILDA® 5-Turn Torque Servo.

  • 1x ServoCity Stingray-4 Servo Gearbox (0.68 Sec/60°, 15 rpm, 1400 Oz-in Torque, 450° Rotation)

  • Gear ratio: 4:1
  • Voltage range: 4.8V - 8.4V
  • No-load speed at 4.8V: 1.00 sec/60° (10 RPM)
  • No-load speed at 6.0V: 0.80 sec/60° (12.5 RPM)
  • No-load speed at 7.4V: 0.68 sec/60° (15 RPM)
  • Stall torque at 4.8V: 960 oz-in (68.9 kg.cm)
  • Stall torque at 6.0V: 1200 oz-in (86.4 kg.cm)
  • Stall torque at 7.4V: 1400 oz-in (100.8 kg.cm)
  • No-load current at 4.8V: 150mA
  • No-load current at 6V: 160mA
  • No-load current at 7.4V: 200mA
  • Stall current at 4.8V: 2000mA
  • Stall current at 6V: 2500mA
  • Stall current at 7.4V: 3000mA
  • Motor type: Brushed DC
  • Direction with increasing PWM signal: Counterclockwise
  • Maximum PWM range: 500-2500μsec
  • Maximum PWM range (continuous): 900-2100µsec
  • Travel per μsec: 0.23°/µsec
  • Maximum rotation: 450° (1.25 turns)
  • Pulse amplitude: 3-5V
  • Deadband width: 4μsec
  • Wire length: 300 mm
  • Wire gauge: 22AWG
  • Connector type: 3-position TJC8 servo connector [MH-FC]