ServoCity 5303 Series Saturn Planetary Gear Motor w/ Encoder (71.2:1, 260 rpm)

Title Default Title
Qty:

Description

  • ServoCity 5303 Series Saturn Planetary Gear Motor w/ Encoder (71.2:1, 260 rpm)
  • Features 24V brushed DC motor
  • Includes 71.2:1 planetary gearbox
  • Achieves 260 RPM at no-load
  • Compatible with 8mm REX shaft
  • Utilizes encoder for position control

The ServoCity 5303 Series Saturn Planetary Gear Motor w/ Encoder (71.2:1, 260 rpm) features a 24V brushed DC motor coupled with a 36mm diameter planetary gearbox, achieving a no-load speed of 260 RPM at 24VDC. This motor is compatible with a wide range of goBILDA® motion components due to its 8mm REX™ shaft and specially designed gearbox head, which allows for direct attachment in various applications.

The motor is equipped with two power wires that ensure plug-and-play compatibility with goBILDA® motor controllers via 3.5mm bullet connectors. While the encoder is not necessary for standard operation, it can be utilized with a JST XH plug to enable position and velocity control. Note: Stalling this motor may cause irreparable damage; exercise extreme caution in applications with hard limits such as linear slides and rotating arms.

  • 1x ServoCity 5303 Series Saturn Planetary Gear Motor w/ Encoder (71.2:1, 260 rpm)

PDF File

ZIP File

  • Motor type: Brushed DC
  • Nominal voltage: 24VDC
  • Gearbox style: Planetary
  • Nominal gear ratio: 71.2:1
  • Gear material: Steel
  • Motor connector type: 3.5mm FH-MC bullet connectors
  • No-load speed: 260 RPM @ 24VDC
  • No-load current: 1.3A @ 24VDC
  • Stall torque: 3447 oz-in (248 kg.cm) @ 24VDC
  • Stall current: 60A @ 24VDC
  • Maximum duty cycle at rated torque: 25% on, 75% off (maximum 15 minutes continuous)
  • Rated torque: 619 oz-in (44.6 kg.cm) @ 24VDC
  • Speed at rated torque: 213 RPM @ 24VDC
  • Current draw at rated torque: 11A @ 24VDC
  • Encoder type: Relative, quadrature
  • Encoder sensor type: Magnetic (Hall effect)
  • Encoder voltage range: 3-5VDC
  • Encoder resolution: 1993.6 PPR at the output shaft
  • Encoder connector type: 4-Pos JST XH [FH-MC]