Atlas Scientific 3/4" Flow m

Title Default Title
Qty:

Description

  • Atlas Scientific 3/4" Flow m
  • Measures total flow and flow rate
  • Operates in high flow ranges: 19-114 L/min
  • Ensures food and gasoline safety
  • Compatible with high pressures: max 200 PSI
  • Complies with NSF/ANSI 61 standards

The Atlas Scientific 3/4" Flow m is engineered to measure both total flow and flow rate within high flow ranges, specifically from 19 liters per minute to 114 liters per minute. This device employs a paddle wheel mechanism, which functions by generating a frequency that is directly proportional to the flow rate, thereby providing accurate measurements of water flow.

  • 1x Atlas Scientific 3/4" Flow m
  • Cable Length: 69 cm (27.1")
  • Diameter: 4.2 mm
  • Length: 100.6 mm (3.9")
  • Width: 65.6 mm (2.5")
  • Height: 74.8 mm (2.9")

PDF File

ZIP File

  • Reads total flow and flow rate
  • Range: 19 L/min – 114 L/min
  • Accuracy: +/- 10%
  • Connector: Tinned leads
  • Thread: 3/4” Female NPT
  • Maximum pressure: 200 PSI
  • Temperature range: -29 – 100 °C
  • Maximum viscosity: 200 SSU
  • Voltage: 4.0V – 24 VDC
  • Life expectancy: Approximately 10 years
  • Current consumption without load: 8mA
  • Maximum current consumption: 70mA
  • Data output: Square wave
  • Food safe
  • Gasoline safe
  • Diesel safe
  • Kerosene safe
  • NSF/ANSI 61 compliant
  • Materials: PVC, Brass, Viton, Ceramic, Polysulfone, Polypropylene Sulfide (all NSF-61 compliant)
  • Operating principle: Paddle wheel flow meter
  • Pre-filter requirements: At least 80 microns
  • Laminar flow requirement: 20cm of straight pipe before the flow meter
  • Output frequency: 0 – 200+ Hz
  • K-factor equation: LPM = 0.5536 x [Hz] + 5.1462